by Echo B | Oct 4, 2016 | Eco Cleaning Pros Floor Care FAQ, Floor Care Education, General Cleaning-Hard Floor, Stripping and waxing
A scrub and re-coat is used to restore the finish of a floor that has been previously sealed and finished but may show visible signs of wearing, dullness, or scuff marks. The scrub is usually done with a scrub machine and pad at a low speed followed by 1-2 coats of...
by Echo B | Oct 4, 2016 | Eco Cleaning Pros Floor Care FAQ, Floor Care Education, General Cleaning-Hard Floor
Streaks are usually caused by using dirty mops, incorrect cleaning chemicals, or applying too thin a coat of...
by Echo B | Oct 4, 2016 | Eco Cleaning Pros Floor Care FAQ, Floor Care Education, General Cleaning-Hard Floor, Stripping and waxing
Stripping is a process which involves the use of a chemical product, known as stripper, to remove the finish from the floor without causing damage to the surface. A stripping agent usually works best with a machine, which agitates the chemical on the floor, while wet,...
by Echo B | Oct 4, 2016 | Eco Cleaning Pros Floor Care FAQ, Floor Care Education, General Cleaning-Hard Floor
You can keep wear and tear, which is normal and will happen, to a minimum by consistent and regularly scheduled floor maintenance via a deep scrub and re-coat. This is done in conjunction with a complete strip and wax 1-2 times per...
by Echo B | Oct 4, 2016 | Eco Cleaning Pros Floor Care FAQ, Floor Care Education, General Cleaning-Hard Floor
This is a procedure required for the maintenance of floors and is done along with top coating (floor finish). Floors that have been finished are machine scrubbed with cleaning pads and a mild detergent, rinsed, and allowed to dry. Top coating is adding 1-2 coats of...